First things first,make sure your wall is clean, dry, and smooth. A quick wipe-down with a DRY cloth will remove any dust or debris that might affect adhesion. This ensures your wall sticker will stick seamlessly and stay put for a long time.

If you need to wash your walls, wait 72h minimum before applying your MagPlay. Don't use detergent as it repel the adhesive.

MagPlay won’t  stick on humid walls.  The decal will fall.

Carefully peel the backing plastic from one corner of the decal.Position the exposed adhesive side on the wall, aligning it as desired. Slowly peel away the rest of the backing paper while smoothing the decal onto the wall. Use a flat tool, like a credit card or a book, to eliminate any air bubbles as you go.

Our decal adhesive is pressure activated The more you press more the adhesive sticks on the wall. Specially during cold weather press or rub on the corner to "warm" the glue on edges.

Please Note: We provide 6 extra double-sided adhesives with your MagPlay decal package. These can be used for extra strength in case your wall isn’t fully compatible with the decal. Apply carefully to the top and bottom corners, or cut into smaller pieces if needed, as the thickness may leave slight marks.

After applying the entire decal, gently run your hand or a soft cloth over its surface to ensure it is securely adhered to the wall. If any air bubbles remain, gently push them towards the nearest edge for a smooth finish.

Keep the packaging and plastic backing, so you have safe storage if you need to move our decal to a different place or room. 

Please note that MagPlay cannot guarantee the decal will continue to stick if moved to another wall.  

Please Note: Cold Weather Edge Adhesion Tip

In cooler weather, the adhesive on your decal especially along the edges can become firm, making it harder to stick smoothly.

1. Set your hair dryer to low heat only.
2. Hold it a short distance from the decal edge and apply gentle heat for 1–2 minutes.
3. While the edge is still warm, press it firmly back onto the wall or board using your hand or a soft cloth.
4. Smooth out any lifted sections so they blend seamlessly.
   

Important: Always keep the hair dryer on a low setting and avoid holding it too close. This prevents heat damage or burning to the front surface of the decal.

Result: The gentle warmth softens and re-activates the adhesive, helping the edge stick securely again—voilà!